What Are Outputs?
Outputs are the things you control with your command(s).
Each output is displayed as a square on the Control Tab.
By default, there is one output, with a smiley face emoji.
When this output is activated, it says "Hello".
Enabling Outputs
To use an output, it must first be enabled. This tells the output to start listening for your command.
To enable an output:
Tap the Start button
Tap the Enable button in the top corner of the output
When an output is enabled:
The border lights up
The output can now be activated
The command the output is listening for appears at the top
Activating Outputs
Outputs can be activated once enabled.
When an output is activated, something happens.
For example, an output might:
Play a sound
Say a word
Turn on a smart home device
Using your Command
Outputs are activated using your command.
When you perform your command:
You will see the strength on the output
When the strength goes above the dashed line (the threshold), the output activates
Stopping an Output
To stop activating an output:
Stop performing your command
Relax and return to Rest
To disable one output
Tap the Enable button
To disable all outputs:
Tap the Stop button
Manual activation
You can also activate an output by tapping it.
This is useful to:
Check that the output is working
Test sounds or actions