To open Calibration Settings, tap the gear icon in the top-right corner of the Calibrate tab.
Change command name (label)
Tap Command to edit
You can change the name to match your thought. For example:
Go
Yes
Push
Important: Changing the name will reset your calibration data. You will need to calibrate again.
Change Rest or Command color
To change the color associated with the feedback of Rest or Command, tap the color circle.
Show Accuracy
Accuracy shows how well Think2Switch™ can tell the difference between Rest and Command.
An accuracy of 60% or higher usually works fine.
Low scores are common when starting out.
Adding a Second Command
You can add a second Command if you want more ways to control things.
A second Command unlocks more control modes. For more information, see control modes.
To add a second command, toggle on 'Two commands' under 'Advanced'.
How it works
During Calibration:
You will calibrate your first Command
Then, you'll automatically start calibrating your second Command
Each command should use a different type of thought. For example, if you use a word for the first command, try imagining a movement for the second command.
Important: Changing the number of Commands will reset your calibration data.
Tips for choosing a second Command 💡
Your second Command should feel different from your first one.
If your first Commands uses a word, your second Command should use movement or movement attempt, not words.
For example:
Trying to press a button with a finger (even if the finger doesn't move)
Trying to squeeze a hand
Trying to push something forward
Remember:
Try to move or imagine moving
Use hands, fingers, or mouth (pressing lips together or puckering lips)
Keep the movement short
Do it the same way each time
It's okay if your body does not move. The trying is what matters.